ISSN 1608-5078 (Online)
Studying Influence of Cooling the Reservoirs to Change Their Productivity
D.G. Yarakhanova
Original article
open access
On Romashkino oil field, which is in late stage of the development, for the first time in the world a large scale contour waterflooding has been successfully applied, which allowed accelerating oil extraction from the earth depth and increased oil recovery significantly. Effect of cold water injection on the thermal state of the productive horizons raises the problem of studying influence of cooling the reservoirs to change their productivity compared to productivity at the initial reservoir temperature. The severity of this problem – preventing cooling of reservoirs – was removed by injecting tank water and the applying heated process wastewater for the extraction of oil from reservoirs exposed to cooling. However, in already cooled areas there was sealed bypassed oil with modified fluid properties, the so-called residual oil. Further development of residual oil hard to recover in terrigenous complex is required, together with the development of carbonate sediments of the Devonian and Lower Carboniferous. This calls for new horizontal oil recovery technologies and thermal methods. For the development of carbonate sediments in the Devonian and Lower Carboniferous, Radaevskian, Bobrikovskian and Tula horizons, Aleksinskian, Namyur-Serpukhovskian and Bashkirskian carbonate deposits, Vereiskian carbonate strata, Kashirsko-Gzhelskian carbonate deposits, and even for the entire bituminous complex standard flooding methods are not applicable. Here at cooling of cool formations with high-viscous and ultra-viscous oil, resin sealed asphalt-resin-paraffin deposits and colmated still areas are formed. They are very difficult and sometimes impossible to obtain by conventional recovery methods. Application of temperature regulation in conjunction with new horizontal technologies and thermal oil recovery methods will largely affect to the success of extraction of residual reserves difficult to recover and highly viscous oil.
cooling the reservoirs, temperature control, reserves difficult to recover, contour waterflooding, tank and waste water, thermal methods, horizontal technologies of oil recovery, highly viscous oil
Ibragimov G.V., Khisamutdinov N.I., Kobyakov N.I. et al. Opyt ogranicheniya zakachki vody na pozdney stadii razrabotki mestorozhdeniy [Experience of water injection limitations on the late stage of field development]. Moscow: VNIIOENG Publ. 1990.
Kudinov V.I. Osnovy neftegazopromyslovogo dela [Fundamentals of Oil and Gas business]. Moscow-Izhevsk: Institut kompyuternykh issledovaniy. 2004. 720 p.
Kudinov V.I., Suchkov B.M. Novye tekhnologii povysheniya dobychi nefti [New technologies to increase the oil production]. Samara: Book Publ. 1998. 368 p.
Muslimov R.Kh. Sovremennye metody povysheniya nefteizvlecheniya: proektirovanie, optimizatsiya i otsenka effektivnosti [Modern methods of enhanced oil recovery: the design, optimization and effectiveness evaluation]. Kazan: Fen Publ. 2005. 688 p.
Neprimerov N.N. Trekhmernyy analiz nefteotdachi okhlazhdennykh plastov [Three-dimensional analysis of cooled oil reservoirs]. Kazan: KSU Publ. 1978.
Kazan (Volga region) Federal University, Kazan, Russia
Yarakhanova D.G. Studying Influence of Cooling the Reservoirs to Change Their Productivity. Georesursy [Georesources]. No. 3(62) Vol.2. 2015. Pp. 64-66.